EVAP emissions — large leak
P0455 Code: EVAP System Large Leak Explained
P0455 stands for "Evaporative Emission System Leak Detected (Large Leak)." The EVAP system captures fuel vapor from the gas tank and stores it in a charcoal canister, then feeds it into the engine to be burned instead of escaping into the air. P0455 means the computer found a big leak in that sealed system.
A "large" leak is roughly the size of a hole 0.040 inch (about 1 mm) or bigger. The most famous cause is a loose or missing gas cap, but a large leak can also come from a cracked hose, a bad purge or vent valve, or a damaged canister. The code is about vapor, not liquid fuel — it rarely affects how the car drives.
P0455 is an emissions code. It almost never affects how the car drives, and it is not a safety issue. The main downside is a check engine light and a failed emissions test. You can usually keep driving while you arrange a repair.
You can keep driving normally. P0455 does not affect engine performance or safety. The only practical reasons to fix it are to pass an emissions test and turn off the check engine light.
P0455 symptoms you might notice
- Check engine light on
- Usually no drivability problems at all
- Sometimes a faint fuel smell, especially after refueling
- A loose, damaged, or missing gas cap
- Failed emissions test
Common causes of P0455
Loose, missing, or bad gas cap
A cap that is loose, cracked, or has a worn seal is the most common cause of a large EVAP leak. It is also the easiest to check.
Cracked or disconnected EVAP hose
The rubber and plastic vapor lines between the tank, canister, and engine can crack, split, or come off, creating a large leak.
Stuck-open purge valve
The purge valve controls vapor flow to the engine. If it sticks open, the system cannot hold vacuum and the computer sees a large leak.
Failed vent valve
The vent valve seals the system during the leak test. If it sticks open, the system cannot pressurize and P0455 sets.
Damaged charcoal canister
A cracked canister or one with a broken internal housing leaks vapor and fails the system test.
Leaking fuel tank or filler neck
Rust or damage to the filler neck or tank can create a large leak, though this is less common.
Before you buy parts
P0455 does not tell you which part is leaking — only that the EVAP system has a large leak. A loose gas cap is the most common cause, but cracked hoses and stuck valves are just as likely when the cap is fine. An EVAP smoke test finds the leak quickly; guessing and replacing the canister or valves without testing often wastes money.
What to check for P0455
- Start with the gas cap. Remove it, inspect the seal for cracks, click it back on until it clicks, and clear the code to see if it returns.
- Look over the visible EVAP hoses from the tank to the canister and from the canister to the engine for cracks, splits, or disconnected lines.
- Have a shop perform an EVAP smoke test. This pushes harmless smoke into the system and shows exactly where the large leak is.
- Check the purge valve and vent valve operation with a scan tool or by testing them directly — a valve stuck open looks just like a hose leak.
- If the cap and hoses are good, the canister and filler neck should be inspected for cracks or damage.
Possible repairs for P0455
Replace the gas cap
A new, correct OEM gas cap is inexpensive and fixes a large share of P0455 codes.
Repair or replace a cracked hose
Replacing a split or disconnected EVAP vapor line seals the system again.
Replace the purge valve
A purge valve stuck open can be replaced to restore the system’s ability to hold vacuum.
Replace the vent valve
A vent valve that will not close during the leak test can be replaced to fix the code.
Replace the charcoal canister
A cracked or damaged canister is replaced when the cap, hoses, and valves are all confirmed good.
Parts and tools that may help
Enter your year, make and model on the store's site to see parts that fit your car.
GarageGuide may earn a commission if you buy through these links, at no extra cost to you. Always check that a part fits your exact vehicle before buying.
P0455 by make
P0455 frequently asked questions
Is P0455 the gas cap?
Often, yes. A loose, cracked, or missing gas cap is the most common cause. Remove it, check the seal, and click it back on. If the code returns after clearing it, the leak is elsewhere in the EVAP system.
Can I drive with a P0455 code?
Yes. P0455 is an emissions code and does not affect how the car drives or its safety. You can keep driving while you arrange a repair.
Will P0455 fail an emissions test?
In most areas, yes. Any illuminated check engine light is an automatic emissions failure, even with no drivability problems.
How do you find an EVAP large leak?
The fastest method is an EVAP smoke test, which pushes harmless smoke into the system so the leak is visible. Guessing at hoses and valves without testing often leads to replacing good parts.
How much does it cost to fix P0455?
It can be very cheap — a gas cap — or more involved if a hose, valve, or canister needs replacing. A smoke test pinpoints the leak so you only replace what is actually broken.