Check Engine Light Is On: What It Means and What to Check

The check engine light is your car’s way of telling you that the onboard computer has noticed something wrong with the engine, emissions, or a related sensor. It can be as harmless as a loose gas cap or as serious as a misfire that can damage the catalytic converter if you keep driving.

The light can come on steady or blink. A steady light usually means a fault has been recorded but the car is still drivable - get it checked soon. A blinking light almost always means an active engine misfire, and that is the case where you should pull over and stop driving to avoid expensive damage.

When to stop driving

Stop driving right away if the check engine light is blinking, the engine is shaking or running very roughly, you smell fuel or sulfur, or the temperature gauge climbs toward the red. A blinking light usually means a misfire that can overheat and ruin the catalytic converter in minutes.

Most common causes

Loose or missing gas cap

The most common and cheapest fix. A cap that is not tightened or sealed properly lets fuel vapors escape, which the evaporative-emissions system flags as a leak.

Oxygen (O2) sensor failure

O2 sensors measure how much oxygen is in the exhaust so the computer can adjust fuel mixture. A failed sensor hurts fuel economy and can eventually damage the catalytic converter.

Failing catalytic converter

The converter cleans harmful gases from the exhaust. If it is clogged or inefficient, you may notice sluggish acceleration, a sulfur smell, and a failed emissions test.

Mass airflow (MAF) sensor problem

The MAF sensor tells the engine how much air is coming in so it can add the right amount of fuel. A dirty or failing MAF causes rough running, hesitation, and poor mileage.

Worn spark plugs or ignition coils

Spark plugs and coils ignite the fuel-air mixture. When they wear out you get misfires, rough idle, power loss, and eventually a blinking check engine light.

Vacuum leak

A cracked hose or bad gasket lets unmetered air into the engine, throwing off the fuel mixture and causing a lean condition, rough idle, or stalling.

What you can safely check yourself

Parts and tools that may help

Enter your year, make and model on the store's site to see parts that fit your car.

GarageGuide may earn a commission if you buy through these links, at no extra cost to you. Always check that a part fits your exact vehicle before buying.

Step-by-step guides

When to call a mechanic

Have the car professionally diagnosed if the light is blinking, if you have cleared a simple gas-cap issue and it returns, or if the stored code points to the catalytic converter, O2 sensor, or misfire and the car is not running normally. A mechanic can read live data to pinpoint the part rather than guessing.

Frequently asked questions

Why is my check engine light flashing?

A flashing check engine light means the engine is misfiring badly enough to send unburned fuel into the catalytic converter, which can overheat and ruin it. Ease off the gas, avoid hard acceleration, and get it checked as soon as you can. If the car is also shaking hard or losing power, pull over and have it towed. Common causes are a failed ignition coil, a worn spark plug, or a fuel injector problem, and the stored code (often P0300 to P0308) tells you which cylinder.

Why does my check engine light come on and off?

A light that comes and goes usually means the problem is intermittent: a loose gas cap, a sensor reading close to its limit, or a small misfire that only happens sometimes. The computer turns the light off after a few good drives, but it saves the code. Have the code read even if the light is off right now.

Can I keep driving with the check engine light on?

If the light is steady and the car drives normally, you can usually drive carefully to a shop. If it blinks, the engine is misfiring and you should pull over to avoid catalytic-converter damage.

Will a loose gas cap really turn on the check engine light?

Yes. A loose or damaged gas cap is one of the most common causes. Tighten it until it clicks; the light often clears after a few driving cycles if that was the only problem.

Can I pass an emissions test with the light on?

In most areas, no. An illuminated check engine light is an automatic emissions-test failure, even if the car is running fine, because the system cannot confirm emissions compliance.

How much does it cost to diagnose a check engine light?

A diagnostic scan is usually inexpensive or free at some parts stores. The repair cost depends entirely on the cause - from a new gas cap to an oxygen sensor, coil, or catalytic converter.

Related warning codes

Related problems

Seeing a warning light? See what each dashboard light means.