EVAP emissions — very small leak · Honda (Acura)
Honda DTC P0456: Small EVAP Leak Detected
On Hondas and Acuras, P0456 is usually the gas cap or the canister vent shut valve not sealing completely. Many Hondas also use their own codes, P1456 and P1457, for EVAP leaks, so you may see those alongside or instead of P0456.
New to this code? Start with the full P0456 guide, which covers what it means on any vehicle.
You can keep driving normally. P0456 does not affect how the car runs or its safety. Fix it to pass emissions and clear the light, but there is no urgency.
Most common causes of P0456 on a Honda
Gas cap
The most common fix. Honda systems are sensitive to a slightly worn seal.
Canister vent shut valve
A valve that doesn't close fully lets a small amount of vapor escape.
Purge valve or small hose cracks
A purge valve that seeps, or small cracks in the hoses around it.
What to check first on your Honda
- Replace the gas cap with an OEM cap if it's old, then clear the code.
- Check the vent shut valve and hoses near the canister for dirt and cracks.
- If it comes back, get a smoke test.
Where it shows up most: Civic, Accord, CR-V, Odyssey, and Pilot.
Honda P0456 FAQ
What causes P0456 on a Honda?
On Hondas and Acuras, P0456 is usually the gas cap or the canister vent shut valve not sealing completely. Many Hondas also use their own codes, P1456 and P1457, for EVAP leaks, so you may see those alongside or instead of P0456.
Can I drive my Honda with a P0456 code?
Yes. On a Honda, start here: Replace the gas cap with an OEM cap if it's old, then clear the code.
Which Honda models get P0456 most?
It shows up most often on the Civic, Accord, CR-V, Odyssey, and Pilot.