EVAP emissions — very small leak · Chevy (Chevrolet, GMC, GM)
Chevy DTC P0456: Small EVAP Leak Detected
On Chevrolet and GM vehicles, P0456 usually comes from the EVAP vent solenoid not sealing completely, a purge valve that seeps, or the gas cap. These are the same parts that cause P0455, just leaking a little instead of a lot.
New to this code? Start with the full P0456 guide, which covers what it means on any vehicle.
You can keep driving normally. P0456 does not affect how the car runs or its safety. Fix it to pass emissions and clear the light, but there is no urgency.
Most common causes of P0456 on a Chevy
EVAP vent solenoid
Dirt in the solenoid or a weak seal lets a small amount of vapor escape.
Purge valve seeping
A purge valve that doesn't close fully can cause a small-leak reading.
Gas cap or filler neck seal
Check the cap seal, and on older trucks look for rust where the filler neck meets the tank.
What to check first on your Chevy
- Replace the gas cap if it's old and clear the code.
- Inspect the vent solenoid near the canister for mud and a damaged connector.
- Get a smoke test if the code returns. Small leaks are hard to find by eye.
Where it shows up most: Silverado, Sierra, Tahoe, Suburban, Equinox, and Malibu.
Chevy P0456 FAQ
What causes P0456 on a Chevy?
On Chevrolet and GM vehicles, P0456 usually comes from the EVAP vent solenoid not sealing completely, a purge valve that seeps, or the gas cap. These are the same parts that cause P0455, just leaking a little instead of a lot.
Can I drive my Chevy with a P0456 code?
Yes. On a Chevy, start here: Replace the gas cap if it's old and clear the code.
Which Chevy models get P0456 most?
It shows up most often on the Silverado, Sierra, Tahoe, Suburban, Equinox, and Malibu.