Catalytic converter efficiency (emissions) · Toyota (Lexus)

Toyota DTC P0420: Catalytic Converter Efficiency Below Threshold

On Toyotas, ask the dealer whether there's a computer software update for your model, since some P0420 cases have been fixed that way. The 2.4L engine (2AZ-FE) in many 2006 to 2011 Camrys and RAV4s is also known for burning oil, which wears out the converter.

New to this code? Start with the full P0420 guide, which covers what it means on any vehicle.

Safe to drive? Usually yes — for a while

In most cases you can keep driving with a steady P0420 light. If the converter is physically clogged (sluggish acceleration, heat under the car, a strong sulfur smell), stop driving and have it checked — a blocked converter can overheat and damage the engine. If the light starts blinking, that is a separate misfire problem and you should pull over.

Most common causes of P0420 on a Toyota

Engine computer software

Toyota has released software updates for P0420 on some models. A dealer can check by VIN.

Air-fuel or O2 sensor

Toyota uses an air-fuel ratio sensor in front of the converter. A slow sensor can set the code.

Oil consumption

Oil burning on the 2.4L engine coats the converter over time.

What to check first on your Toyota

Where it shows up most: Camry, Corolla, RAV4, Prius, and Tacoma.

Toyota P0420 FAQ

What causes P0420 on a Toyota?

On Toyotas, ask the dealer whether there's a computer software update for your model, since some P0420 cases have been fixed that way. The 2.4L engine (2AZ-FE) in many 2006 to 2011 Camrys and RAV4s is also known for burning oil, which wears out the converter.

Can I drive my Toyota with a P0420 code?

Usually yes — for a while. On a Toyota, start here: Call a Toyota dealer with your VIN and ask about software updates for P0420.

Which Toyota models get P0420 most?

It shows up most often on the Camry, Corolla, RAV4, Prius, and Tacoma.

P0420 on other makes

← Back to the full P0420 guide