Engine misfire (random/multiple cylinders) · Honda (Acura)

Honda DTC P0300: Random or Multiple Cylinder Misfire

On Hondas, P0300 is often worn spark plugs, a failing coil, or valves that need adjusting. Honda engines need periodic valve adjustment, and tight valves cause misfires. On V6 models with Variable Cylinder Management, oil burning can foul the rear-bank plugs.

New to this code? Start with the full P0300 guide, which covers what it means on any vehicle.

Safe to drive? Short trips only if the light is steady

If the light is steady and the misfire is mild, you can drive gently to a shop. If the check engine light is blinking under acceleration, stop driving — unburned fuel overheats and destroys the catalytic converter. A severe misfire or stalling means the car should not be driven.

Most common causes of P0300 on a Honda

Spark plugs or ignition coils

Coils on Honda V6 engines fail often, and plugs past their interval misfire.

Valve adjustment

Tight valves don't seal fully, and the misfire is usually worse when the engine is cold.

Oil-fouled plugs on VCM V6 engines

Oil burning in the cylinders that shut off can foul those plugs.

What to check first on your Honda

Where it shows up most: Accord, Civic, CR-V, Odyssey, and Pilot.

Honda P0300 FAQ

What causes P0300 on a Honda?

On Hondas, P0300 is often worn spark plugs, a failing coil, or valves that need adjusting. Honda engines need periodic valve adjustment, and tight valves cause misfires. On V6 models with Variable Cylinder Management, oil burning can foul the rear-bank plugs.

Can I drive my Honda with a P0300 code?

Short trips only if the light is steady. On a Honda, start here: Read the cylinder-specific codes and swap the coil to see if the misfire moves.

Which Honda models get P0300 most?

It shows up most often on the Accord, Civic, CR-V, Odyssey, and Pilot.

P0300 on other makes

← Back to the full P0300 guide